Quote for MS27066-12C With NSN 4730-00-969-6657 of Parker Hannifin Corporation - 009696657 50599 4730 Hose Pipe Tube Lubrication and Railing Fittings Elbow Swivel Flange To Hose

Mfg Part Number: MS27066-12C	Alternate P/N: MS2706612C
NSN : 4730-00-969-6657	NIIN : 009696657
CAGE Code : 50599	Manufacturer: Parker Hannifin Corporation
Item Name : Elbow Swivel Flange To Hose	FSC : 4730 Hose Pipe Tube Lubrication and Railing Fittings

Thank you for your interest in MS27066-12C part of with NSN 4730-00-969-6657 having CAGE Code 50599 under FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings manufactured by Parker Hannifin Corporation. You have reached our RFQ page for MS27066-12C part, and completing the form below will allow you to request a quote on this Parker Hannifin Corporation product for your comparisons. As you complete our offered form, we ask that you provide us with as much information regarding your needs as you can for the NSN part MS27066-12C, so that we may best personalize a solution that is fit for you. 009696657 50599 4730 Hose Pipe Tube Lubrication and Railing Fittings Elbow Swivel Flange To Hose

PRODUCT DETAILS “*” Required Fields Are Compulsory

CONTACT INFORMATION

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET
If you have more than one item, upload your spreadsheet here

Alongside NSN 4730-00-969-6657 we have countless other items from Parker Hannifin Corporation and other leading manufacturers that are readily available for purchase. Nascent Aero lists parts alongside applicable CAGE Codes for the benefit of your search process, such as this particular NSN part MS27066-12C being produced under the CAGE Code 50599. As our team members are always available for customers at all times, we guarantee responses to completed quote requests within 15 minutes of submission. Additionally, our team members can walk you through the purchasing process with person-to-person communication every step of the way, ensuring that all your needs are thoroughly and efficiently met. If you have any questions or concerns regarding our offerings and wish to speak with a representative, give us a call or email at any time; we are available 24/7x365.

NSN Information for Part Number MS27066-12C with NSN 4730-00-969-6657, 4730009696657

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4730-00-969-6657 Item Description: ELBOW,SWIVEL FLANGE TO HOSE	4730	009696657	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
G65122-12	5	1	4

Characteristics Data of NSN 4730-00-969-6657, 4730009696657

MRC	Criteria	Characteristic
AECS	BOLT HOLE QUANTITY	4 1ST END"
AEHZ	MAXIMUM OPERATING TEMP	450.0 DEG FAHRENHEIT SINGLE RESPONSE"
AHNC	CONNECTION STYLE	GRIPPING NIPPLE (NOSE) 2ND END"
AHSJ	LEG LENGTH	1.154 INCHES NOMINAL 1ST END"
AHSJ	LEG LENGTH	2.438 INCHES NOMINAL 2ND END"
AKGF	NOMINAL WIDTH	1.594 INCHES 1ST END"
AKGG	NOMINAL LENGTH	1.594 INCHES 1ST END"
ARKN	FLANGE SHAPE	RECTANGULAR WITH HOLES 1ST END"
AWLS	CONNECTION TYPE	FLANGE 1ST END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL HOSE GRIPPING 2ND END"
CQGM	MAXIMUM OPERATING PRESSURE	1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE"
CRFY	FLOW ANGLE	90.0 DEGREES"
CWCK	NOMINAL THICKNESS	0.234 INCHES 1ST END"
CWCQ	BOLT HOLE NOMINAL DIAMETER	0.205 INCHES 1ST END"
CWCY	CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.156 INCHES 1ST END"
CWDC	CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.156 INCHES 1ST END"
CWDF	FLANGE FACE DESIGN	RAISED SWIVEL 1ST END"
CWDH	RAISED FACE NOMINAL HEIGHT	0.020 INCHES 1ST END"
CWDL	RAISED FACE NOMINAL DIAMETER	1.250 INCHES 1ST END"
CWDW	NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED	0.650 INCHES 2ND END"
CWDZ	NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED	0.826 INCHES 2ND END"
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-T-8808 COND A MIL SPEC SINGLE MATERIAL RESPONSE ELBOW"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE NIPPLE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE SHOULDER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE UNION"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL 2ND RESPONSE"
MEDA	MEDIA FOR WHICH DESIGNED	WATER-OIL-GAS 1ST RESPONSE"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-27272,NR 3.8.2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL"
ZZZK	SPECIFICATION/STANDARD DATA	96906-MS27066 GOVERNMENT STANDARD"
AECS	BOLT HOLE QUANTITY	4 1ST END"
AEHZ	MAXIMUM OPERATING TEMP	450.0 DEG FAHRENHEIT SINGLE RESPONSE"
AHNC	CONNECTION STYLE	GRIPPING NIPPLE (NOSE) 2ND END"
AHSJ	LEG LENGTH	1.154 INCHES NOMINAL 1ST END"
AHSJ	LEG LENGTH	2.438 INCHES NOMINAL 2ND END"
AKGF	NOMINAL WIDTH	1.594 INCHES 1ST END"
AKGG	NOMINAL LENGTH	1.594 INCHES 1ST END"
ARKN	FLANGE SHAPE	RECTANGULAR WITH HOLES 1ST END"
AWLS	CONNECTION TYPE	FLANGE 1ST END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL HOSE GRIPPING 2ND END"
CQGM	MAXIMUM OPERATING PRESSURE	1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE"
CRFY	FLOW ANGLE	90.0 DEGREES"
CWCK	NOMINAL THICKNESS	0.234 INCHES 1ST END"
CWCQ	BOLT HOLE NOMINAL DIAMETER	0.205 INCHES 1ST END"
CWCY	CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.156 INCHES 1ST END"
CWDC	CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.156 INCHES 1ST END"
CWDF	FLANGE FACE DESIGN	RAISED SWIVEL 1ST END"
CWDH	RAISED FACE NOMINAL HEIGHT	0.020 INCHES 1ST END"
CWDL	RAISED FACE NOMINAL DIAMETER	1.250 INCHES 1ST END"
CWDW	NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED	0.650 INCHES 2ND END"
CWDZ	NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED	0.826 INCHES 2ND END"
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-T-8808 COND A MIL SPEC SINGLE MATERIAL RESPONSE ELBOW"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE NIPPLE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE SHOULDER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE UNION"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL 2ND RESPONSE"
MEDA	MEDIA FOR WHICH DESIGNED	WATER-OIL-GAS 1ST RESPONSE"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-27272,NR 3.8.2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL"
ZZZK	SPECIFICATION/STANDARD DATA	96906-MS27066 GOVERNMENT STANDARD"