Quote for R27778 With NSN 4720-00-515-0314 of Parker Hannifin Corporation - 005150314 50599 4720 Hose and Flexible Tubing Hose Assembly Nonmetallic

Mfg Part Number: R27778	NSN : 4720-00-515-0314
NIIN : 005150314	CAGE Code : 50599
Manufacturer: Parker Hannifin Corporation	Item Name : Hose Assembly Nonmetallic
FSC : 4720 Hose and Flexible Tubing

Thank you for your interest in R27778 part of with NSN 4720-00-515-0314 having CAGE Code 50599 under FSC 4720 Hose and Flexible Tubing manufactured by Parker Hannifin Corporation. You have reached our RFQ page for R27778 part, and completing the form below will allow you to request a quote on this Parker Hannifin Corporation product for your comparisons. As you complete our offered form, we ask that you provide us with as much information regarding your needs as you can for the NSN part R27778, so that we may best personalize a solution that is fit for you. 005150314 50599 4720 Hose and Flexible Tubing Hose Assembly Nonmetallic

PRODUCT DETAILS “*” Required Fields Are Compulsory

CONTACT INFORMATION

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET
If you have more than one item, upload your spreadsheet here

Alongside NSN 4720-00-515-0314 we have countless other items from Parker Hannifin Corporation and other leading manufacturers that are readily available for purchase. Nascent Aero lists parts alongside applicable CAGE Codes for the benefit of your search process, such as this particular NSN part R27778 being produced under the CAGE Code 50599. As our team members are always available for customers at all times, we guarantee responses to completed quote requests within 15 minutes of submission. Additionally, our team members can walk you through the purchasing process with person-to-person communication every step of the way, ensuring that all your needs are thoroughly and efficiently met. If you have any questions or concerns regarding our offerings and wish to speak with a representative, give us a call or email at any time; we are available 24/7x365.

NSN Information for Part Number R27778 with NSN 4720-00-515-0314, 4720005150314

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-00-515-0314 Item Description: HOSE ASSEMBLY,NONMETALLIC	4720	005150314	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
6851398	C	2	1

Characteristics Data of NSN 4720-00-515-0314, 4720005150314

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AARX	INSIDE DIAMETER	0.937 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 350.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKU	FLANGE THICKNESS	0.297 INCHES NOMINAL 1ST END"
ABKU	FLANGE THICKNESS	0.297 INCHES NOMINAL 2ND END"
ABKV	OUTSIDE DIAMETER	1.312 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	5.000 INCHES"
ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	233.0"
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.312 INCHES NOMINAL 2ND END"
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.656 INCHES NOMINAL 1ST END"
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.312 INCHES NOMINAL 2ND END"
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.656 INCHES NOMINAL 1ST END"
AECS	BOLT HOLE QUANTITY	4 1ST END"
AECS	BOLT HOLE QUANTITY	4 2ND END"
AFQN	FLANGE LENGTH	1.750 INCHES NOMINAL 2ND END"
AFQN	FLANGE LENGTH	2.188 INCHES NOMINAL 1ST END"
AGFF	FLANGE WIDTH	1.750 INCHES NOMINAL 2ND END"
AGFF	FLANGE WIDTH	2.188 INCHES NOMINAL 1ST END"
AHNC	CONNECTION STYLE	RAISED SWIVEL 1ST END"
AHNC	CONNECTION STYLE	RAISED SWIVEL 2ND END"
AHNX	BOLT HOLE DIAMETER	0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM 1ST END"
AHNX	BOLT HOLE DIAMETER	0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM 2ND END"
AJED	RAISED FACE HEIGHT	0.015 INCHES NOMINAL 1ST END"
AJED	RAISED FACE HEIGHT	0.015 INCHES NOMINAL 2ND END"
AJEE	RAISED FACE DIAMETER	1.510 INCHES NOMINAL 2ND END"
AJEE	RAISED FACE DIAMETER	1.854 INCHES NOMINAL 1ST END"
AKUT	END FLANGE CONSTRUCTION	SOLID 1ST END"
AKUT	END FLANGE CONSTRUCTION	SOLID 2ND END"
AKUU	END CONNECTION DESIGN	ELBOW 1ST END"
AKUU	END CONNECTION DESIGN	ELBOW 2ND END"
AWLS	CONNECTION TYPE	RAISED FACE FLANGE 1ST END"
AWLS	CONNECTION TYPE	RAISED FACE FLANGE 2ND END"
CQBD	BURST TEST PRESSURE	1200.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGM	MAXIMUM OPERATING PRESSURE	300.0 POUNDS PER SQUARE INCH"
CRDW	HYDROSTATIC TEST PRESSURE	600.0 POUNDS PER SQUARE INCH"
CRFY	FLOW ANGLE	90.0 DEGREES 1ST END"
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT"
CRWL	INSIDE SURFACE CONDITION	CONVOLUTED"
CRXX	MEASURING METHOD AND LENGTH	37.750 INCHES MINIMUM WORKING AND 38.250 INCHES MAXIMUM WORKING"
CTCJ	FLANGE STYLE	RECTANGULAR (INCLUDES SQUARE) 1ST END"
CTCJ	FLANGE STYLE	RECTANGULAR (INCLUDES SQUARE) 2ND END"
SUPP	SUPPLEMENTARY FEATURES	THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 1P322, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AARX	INSIDE DIAMETER	0.937 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 350.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKU	FLANGE THICKNESS	0.297 INCHES NOMINAL 1ST END"
ABKU	FLANGE THICKNESS	0.297 INCHES NOMINAL 2ND END"
ABKV	OUTSIDE DIAMETER	1.312 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	5.000 INCHES"
ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	233.0"
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.312 INCHES NOMINAL 2ND END"
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.656 INCHES NOMINAL 1ST END"
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.312 INCHES NOMINAL 2ND END"
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.656 INCHES NOMINAL 1ST END"
AECS	BOLT HOLE QUANTITY	4 1ST END"
AECS	BOLT HOLE QUANTITY	4 2ND END"
AFQN	FLANGE LENGTH	1.750 INCHES NOMINAL 2ND END"
AFQN	FLANGE LENGTH	2.188 INCHES NOMINAL 1ST END"
AGFF	FLANGE WIDTH	1.750 INCHES NOMINAL 2ND END"
AGFF	FLANGE WIDTH	2.188 INCHES NOMINAL 1ST END"
AHNC	CONNECTION STYLE	RAISED SWIVEL 1ST END"
AHNC	CONNECTION STYLE	RAISED SWIVEL 2ND END"
AHNX	BOLT HOLE DIAMETER	0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM 1ST END"
AHNX	BOLT HOLE DIAMETER	0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM 2ND END"
AJED	RAISED FACE HEIGHT	0.015 INCHES NOMINAL 1ST END"
AJED	RAISED FACE HEIGHT	0.015 INCHES NOMINAL 2ND END"
AJEE	RAISED FACE DIAMETER	1.510 INCHES NOMINAL 2ND END"
AJEE	RAISED FACE DIAMETER	1.854 INCHES NOMINAL 1ST END"
AKUT	END FLANGE CONSTRUCTION	SOLID 1ST END"
AKUT	END FLANGE CONSTRUCTION	SOLID 2ND END"
AKUU	END CONNECTION DESIGN	ELBOW 1ST END"
AKUU	END CONNECTION DESIGN	ELBOW 2ND END"
AWLS	CONNECTION TYPE	RAISED FACE FLANGE 1ST END"
AWLS	CONNECTION TYPE	RAISED FACE FLANGE 2ND END"
CQBD	BURST TEST PRESSURE	1200.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGM	MAXIMUM OPERATING PRESSURE	300.0 POUNDS PER SQUARE INCH"
CRDW	HYDROSTATIC TEST PRESSURE	600.0 POUNDS PER SQUARE INCH"
CRFY	FLOW ANGLE	90.0 DEGREES 1ST END"
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT"
CRWL	INSIDE SURFACE CONDITION	CONVOLUTED"
CRXX	MEASURING METHOD AND LENGTH	37.750 INCHES MINIMUM WORKING AND 38.250 INCHES MAXIMUM WORKING"
CTCJ	FLANGE STYLE	RECTANGULAR (INCLUDES SQUARE) 1ST END"
CTCJ	FLANGE STYLE	RECTANGULAR (INCLUDES SQUARE) 2ND END"
SUPP	SUPPLEMENTARY FEATURES	THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 1P322, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984"