Quote for CM22522-14 With NSN 5905-00-815-7885 of Clarostat Sensors And Controls (CAGE Code 12697)

Mfg Part Number: CM22522-14	Alternate P/N: CM2252214
NSN : 5905-00-815-7885	NIIN : 008157885
CAGE Code : 12697	Manufacturer: Clarostat Sensors And Controls
Item Name : Resistor Variable Wire Wound Non	FSC : 5905 Resistors

Thank you for your interest in CM22522-14 part of with NSN 5905-00-815-7885 having CAGE Code 12697 under FSC 5905 Resistors manufactured by Clarostat Sensors And Controls. You have reached our RFQ page for CM22522-14 part, and completing the form below will allow you to request a quote on this Clarostat Sensors And Controls product for your comparisons. As you complete our offered form, we ask that you provide us with as much information regarding your needs as you can for the NSN part CM22522-14, so that we may best personalize a solution that is fit for you. 008157885 12697 5905 Resistors Resistor Variable Wire Wound Non

PRODUCT DETAILS “*” Required Fields Are Compulsory

CONTACT INFORMATION

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET
If you have more than one item, upload your spreadsheet here

Alongside NSN 5905-00-815-7885 we have countless other items from Clarostat Sensors And Controls and other leading manufacturers that are readily available for purchase. Nascent Aero lists parts alongside applicable CAGE Codes for the benefit of your search process, such as this particular NSN part CM22522-14 being produced under the CAGE Code 12697. As our team members are always available for customers at all times, we guarantee responses to completed quote requests within 15 minutes of submission. Additionally, our team members can walk you through the purchasing process with person-to-person communication every step of the way, ensuring that all your needs are thoroughly and efficiently met. If you have any questions or concerns regarding our offerings and wish to speak with a representative, give us a call or email at any time; we are available 24/7x365.

NSN Information for Part Number CM22522-14 with NSN 5905-00-815-7885, 5905008157885

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-815-7885 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	008157885	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CM22522-14	1	2	3

Characteristics Data of NSN 5905-00-815-7885, 5905008157885

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.370 INCHES NOMINAL"
ABJT	TERMINAL LENGTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM"
ABKW	III OVERALL HEIGHT	0.860 INCHES NOMINAL"
ABMK	III OVERALL WIDTH	0.300 INCHES MAXIMUM"
ABTB	MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM"
ABWV	SHAFT DIAMETER	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.030 INCHES MINIMUM"
ADAQ	BODY LENGTH	1.340 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.300 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.360 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFK	MAXIMUM STARTING TORQUE	7.50 INCH-OUNCES"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL"
CQCC	ELECTRICAL RESISTANCE PER SECTION	25.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.310 INCHES NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	135.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-100.0 TO 100.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.8 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	80294-9163641 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.370 INCHES NOMINAL"
ABJT	TERMINAL LENGTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM"
ABKW	III OVERALL HEIGHT	0.860 INCHES NOMINAL"
ABMK	III OVERALL WIDTH	0.300 INCHES MAXIMUM"
ABTB	MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM"
ABWV	SHAFT DIAMETER	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.030 INCHES MINIMUM"
ADAQ	BODY LENGTH	1.340 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.300 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.360 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFK	MAXIMUM STARTING TORQUE	7.50 INCH-OUNCES"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL"
CQCC	ELECTRICAL RESISTANCE PER SECTION	25.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.310 INCHES NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	135.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-100.0 TO 100.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.8 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	80294-9163641 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"